EXAMS NSE8_812 TORRENT & NSE8_812 VERIFIED ANSWERS

Exams NSE8_812 Torrent & NSE8_812 Verified Answers

Exams NSE8_812 Torrent & NSE8_812 Verified Answers

Blog Article

Tags: Exams NSE8_812 Torrent, NSE8_812 Verified Answers, Guide NSE8_812 Torrent, Free NSE8_812 Download, Test NSE8_812 Dumps Free

If you don't have enough time to study for your certification exam, ActualTestsQuiz provides Fortinet NSE8_812 Pdf questions. You may quickly download Fortinet NSE8_812 exam questions in PDF format on your smartphone, tablet, or desktop. You can Print Fortinet NSE8_812 PDF Questions and answers on paper and make them portable so you can study on your own time and carry them wherever you go.

To pass the Fortinet NSE8_812 Exam, candidates need to demonstrate their knowledge and skills in configuring, managing, and troubleshooting Fortinet's security solutions. NSE8_812 exam covers a broad range of topics, including advanced threat protection, network design, virtual private networks (VPNs), and security management. Candidates are required to have a deep understanding of Fortinet's products and solutions, as well as the ability to apply this knowledge to solve complex security challenges.

>> Exams NSE8_812 Torrent <<

Benefits Of Multiple Formats Of Fortinet NSE8_812 Exam Questions

Like the real exam, ActualTestsQuiz Fortinet NSE8_812 Exam Dumps not only contain all questions that may appear in the actual exam, also the SOFT version of the dumps comprehensively simulates the real exam. With ActualTestsQuiz real questions and answers, when you take the exam, you can handle it with ease and get high marks.

Fortinet NSE8_812 Certification Exam is a challenging but highly respected credential for network security professionals who want to advance their careers and increase their expertise in Fortinet products and technologies. NSE8_812 exam covers a wide range of topics and requires a significant amount of preparation and study to pass. However, achieving this certification is a valuable accomplishment that can open up new opportunities and increase earning potential.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q93-Q98):

NEW QUESTION # 93
SD-WAN is configured on a FortiGate. You notice that when one of the internet links has high latency the time to resolve names using DNS from FortiGate is very high.
You must ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work.
What should you configure?

  • A. Configure local out traffic to use the outgoing interface based on SD-WAN rules with a manual defined IP associated to a loopback interface and configure an SD-WAN rule from the loopback to the DNS server.
  • B. Configure local out traffic to use the outgoing interface based on SD-WAN rules with the interface IP and configure an SD-WAN rule to the DNS server.
  • C. Configure two DNS servers and use DNS servers recommended by the two internet providers.
  • D. Configure an SD-WAN rule to the DNS server and use the FortiGate interface IPs in the source address.

Answer: B

Explanation:
SD-WAN is a feature that allows users to optimize network performance and reliability by using multiple WAN links and applying rules based on various criteria, such as latency, jitter, packet loss, etc. One way to ensure that the FortiGate DNS resolution times are as low as possible with the least amount of work is to configure local out traffic to use the outgoing interface based on SD-WAN rules with the interface IP and configure an SD-WAN rule to the DNS server. This means that the FortiGate will use the best WAN link available to send DNS queries to the DNS server according to the SD-WAN rule, and use its own interface IP as the source address. This avoids NAT issues and ensures optimal DNS performance. References:
https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan/19662/sd-wan


NEW QUESTION # 94
Refer to the exhibits.


The exhibits show a FortiGate network topology and the output of the status of high availability on the FortiGate.
Given this information, which statement is correct?

  • A. FGVMEVLQOG33WM3D and FGVMEVGCJNHFYI4A share a virtual MAC address.
  • B. The cluster mode can support a maximum of four (4) FortiGate VMs
  • C. The cluster members are on the same network and the IP addresses were statically assigned.
  • D. The ethertype values of the HA packets are 0x8890, 0x8891, and 0x8892

Answer: C

Explanation:
The output of the status of high availability on the FortiGate shows that the cluster mode is active-passive, which means that only one FortiGate unit is active at a time, while the other unit is in standby mode. The active unit handles all traffic and also sends HA heartbeat packets to monitor the standby unit. The standby unit becomes active if it stops receiving heartbeat packets from the active unit, or if it receives a higher priority from another cluster unit. In active-passive mode, all cluster units share a virtual MAC address for each interface, which is used as the source MAC address for all packets forwarded by the cluster. References:
https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103439/high-availability-with-two-fortigates


NEW QUESTION # 95
Refer to the exhibit.

You have been tasked with replacing the managed switch Forti Switch 2 shown in the topology.
Which two actions are correct regarding the replacement process? (Choose two.)

  • A. After replacing the FortiSwitch unit, the automatically created trunk name changes.
  • B. After replacing the FortiSwitch unit, the automatically created trunk name does not change
  • C. MCLAG-ICL will be automatically reconfigured once the new switch is connected to the FortiGate.
  • D. CLAG-ICL needs to be manually reconfigured once the new switch is connected to the FortiGate

Answer: B,D

Explanation:
* A is correct because the automatically created trunk name is based on the MAC address of the FortiSwitch unit. When the FortiSwitch unit is replaced, the MAC address will change, but the trunk name will not change.
* B is correct because CLAG-ICL is a manually configured link aggregation group. When the FortiSwitch unit is replaced, the CLAG-ICL configuration will need to be manually reconfigured on the new FortiSwitch unit.
The other options are incorrect. Option C is incorrect because the automatically created trunk name does not change when the FortiSwitch unit is replaced. Option D is incorrect because MCLAG-ICL is a manually configured link aggregation group and will not be automatically reconfigured when the FortiSwitch unit is replaced.
References:
* Configuring link aggregation on FortiSwitches | FortiSwitch / FortiOS 7.0.4 - Fortinet Document Library
* Managing FortiLink | FortiGate / FortiOS 7.0.4 - Fortinet Document Library
https://docs.fortinet.com/document/fortiswitch/7.0.8/devices-managed-by-fortios/173284/replacing-a- managed-fortiswitch-unit


NEW QUESTION # 96
Refer to the exhibit, which shows a Branch1 configuration and routing table.

In the SD-WAN implicit rule, you do not want the traffic load balance for the overlay interface when all members are available.
In this scenario, which configuration change will meet this requirement?

  • A. Configure the cost in each overlay member to 10.
  • B. Create a new static route with the internet sdwan-zone only
  • C. Change the load-balance-mode to source-ip-based.
  • D. Configure the priority in each overlay member to 10.

Answer: D

Explanation:
The default load balancing mode for the SD-WAN implicit rule is source IP based. This means that traffic will be load balanced evenly between the overlay members, regardless of the member's priority.
To prevent traffic from being load balanced, you can configure the priority of each overlay member to 10.
This will make the member ineligible for load balancing.
The other options are not correct. Changing the load balancing mode to source-IP based will still result in traffic being load balanced. Creating a new static route with the internet sdwan-zone only will not affect the load balancing of the overlay interface. Configuring the cost in each overlay member to 10 will also not affect the load balancing, as the cost is only used when the implicit rule cannot find a match for the destination IP address.

https://docs.fortinet.com/document/fortigate/6.4.0/sd-wan-deployment-for-mssps/775385/defining-interface- members


NEW QUESTION # 97
Refer to the exhibit.

You are operating an internal network with multiple OSPF routers on the same LAN segment. FGT_3 needs to be added to the OSPF network and has the configuration shown in the exhibit. FGT_3 is not establishing any OSPF connection.
What needs to be changed to the configuration to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election?

  • A.
  • B.
  • C.
  • D.

Answer: C

Explanation:
The OSPF configuration shown in the exhibit is using the default priority value of 1 for the interface port1.
This means that FGT_3 will participate in the DR/BDR election process with the other OSPF routers on the same LAN segment. However, this is not desirable because FGT_3 is a new device that needs to be added to the OSPF network without affecting the existing DR/BDR election. Therefore, to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election, the priority value of the interface port1 should be changed to 0. This will prevent FGT_3 from becoming a DR or BDR and allow it to form OSPF adjacencies with the current DR and BDR. Option B shows the correct configuration that changes the priority value to 0. Option A is incorrect because it does not change the priority value. Option C is incorrect because it changes the network type to point-to-point, which is not suitable for a LAN segment with multiple OSPF routers. Option D is incorrect because it changes the area ID to 0.0.0.1, which does not match the area ID of the other OSPF routers on the same LAN segment. References:https://docs.fortinet.com/document/fortigate/7.
0.0/administration-guide/358640/basic-ospf-example


NEW QUESTION # 98
......

NSE8_812 Verified Answers: https://www.actualtestsquiz.com/NSE8_812-test-torrent.html

Report this page